Install and CLICK in the module
Easy to install
By using our standard product “the PLUGG” into many different ceilings,you can within minutes, install,connect and surface finish a led unit,smoke alarm,motion detector etc..
All the products make an magnetic connection with the PLUGG.
How to fill the gap between the PLUGG & ceiling
Always use a water based acrylic raisin filler that does not shrink or crack.
This makes it possible to finish the gap in one step.
The surface must be clean, dry, stable and free of every element so nothing can effect the product adhesion.
Treat the powdery surfaces by means of a surface fixing agent finish with sand paper and paint.
Therefor Haay recommends Knauf Repafill A6 and D2 fillers.
When filling the gap between the plasterboard and the PLUG make sure that the applied filler has ,with the last application has a smooth surface, so paint can be applied after drying (min 2 hr) and no extra finish is needed.
All our PLUGGS
Once the PLUGG is installed the lighting in a room can go with the flow.
From normal downlight in a childsroom the room can be transformed into a private office or lounge room.
Just by changing the modules into the PLUGG.
No damage is done to the ceiling and the place where the downlight was can now be a directional spot,pendant or loudspeaker.
The PLUGG has the UL94-V0 FLAMMABILITY STANDARD certification.